Changing the settings of the auto power on/off function

You can use the timer function to turn the photo frame on or off automatically when the photo frame is turned on.

1 Press MENU.

The menu is displayed.

2 Press B/b to select the (Settings) tab.

The settings screen is displayed.

3 Press v/V to select [Auto power ON/ OFF] and press .

The screen used for setting a value for [Auto power ON/OFF] is displayed.

When using DPF-A72/E72, you can set the auto power function on [Simple] mode only, so skip to step 5.

5 Set the time setting.

[Simple]

1Press v/V to select [Auto power ON/

OFF] and then press .

2Press v/V to select [Enable] and then

press .

3Set the auto on/off timer.

Press v/V to set the time you want. AM or PM is displayed on the right of

the screen when you select [12 hours] on the time display setting.

4Set the auto ON/OFF day.

Press v/V to select the day you want to

use this function and then press to check. Press v/V to select [OK] and then press .

[Advanced] (DPF-D72 only)

4 Press v/V to select [Simple] or [Advanced] and then press (DPF-D72 only)

[Simple]: Sets the auto power ON/OFF function finely in one minute increments.

[Advanced]: Sets the auto power ON/OFF function according to a day of the week by one hour units.

1Press B/b/v/V to select the time you want to use the auto power on/off function.

You can set this function according to a day of the week by one hour units.

The color of the selected time zone

changes to blue after you press . The power supply of the photo frame will be

turned on when the blue time zone time occurs. The color of the selected time

42 GB