3 Place an exchangeable panel to the photo frame, while aligning the hole on an exchangeable panel to the remote sensor of the photo frame.
Remote sensor
4 Press the four corners of the exchangeable panel to snap it into the photo frame.
Connecting to the AC power source
1 Insert the plug of the AC adaptor into the DC IN 5 V jack on the rear of the photo frame.
2 Connect the AC adaptor to the wall outlet.
The photo frame is automatically turned on.
To DC IN 5 V jack
DC Plug
To wall outlet
DC cable
AC adaptor main unit
AC plug
Notes
•The socket outlet should be as close as possible to the unit, and easily accessible.
•Do not place the photo frame on an unsteady or tilted surface.
•Connect the AC adaptor to an easily accessible wall outlet close by. If trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet.