Deleting an image
1 Press MENU.
The menu is displayed.
2 Press v/V to select [Delete] and then press 
.
The Delete menu is displayed.
3 Press v/V to select [This image], [Selected images] or [All images] and then press 
.
[This image]: Deletes the image currently displayed.
[Selected images]: Deletes the selected image from the image list.
[All images]: Deletes all images in the device displayed.
[Selected images] shows the images in the device which are currently displayed as index view.
If you select [This image] or [All images], go to step 5 to confirm the operation.
4 If you selected [Selected images], specify the image to delete.
1Press B/b/v/V to select the image to
delete and then press 
.
Check mark will be placed on each selected image. Repeat this operation to delete multiple images at the same time.
To cancel the selection, select images to cancel and then press 
to delete
check mark.
2Press MENU.
The delete confirmation screen is displayed.
5 Press v/V to select [Yes] and then press 
.
The image is deleted.
Tip
To perform this operation from the photo frame, press MENU, press the direction buttons to select the item, and then press 
ENTER.
Format of internal memory
When you use [Format internal memory] in [Various Settings] menu, you can format the internal memory.
Notes
•On slideshow display, you cannot delete the images. Change the display mode to single image display or index image display.
•When the message [Cannot delete a protected image.] appears on the screen, the image file was set to Read Only on a computer. In this case, connect the photo frame to a computer, and delete this file by using the computer.