Changing the various settings
Setting procedure
You can change display, slideshow, brightness, language, and other settings of the photo frame. It is also possible to reset the settings to their factory defaults and format the intenal memory.
Note
Only internal memory can be formatted.
1 Press MENU.
The menu is displayed.
2 Press v/V to select [Various settings] and then press 
to display the Various settings screen.
4 Press v/V to select the item you want to change and then press 
.
This enables you to set each of the items (page 30).
Note
When the photo frame is, for instance, displaying a slideshow, some items are unavailable for changing the settings. They are displayed in gray and cannot be selected.
5 Press v/V to select a setting value and then press 
.
Each time you press v/V (v/V from the photo frame), the setting value changes. In the case of a numerical value, press V to increase the value and press v to decrease the value.
If you press 
, the setting is confirmed.
6 Press MENU.
The menu closes.
Tips
•To perform this operation from the photo frame,
press MENU, press the direction buttons to select the item, and then press 
ENTER.
•To reset the settings to their factory defaults, select
[Reset] and then press 
. Adjusted values except clock setting are reset to default settings.
operations Advanced
3 Press v/V to select the item you want to change and then press 
.
The setting screen of the selected item is displayed.
For example, when [Slideshow Settings] is selected.
Continued