6 Press 
when the confirmation screen is displayed.
Notes
•Images in the internal memory cannot be added to the album.
•Do not turn off the power, remove the memory card, or disconnect the external device while an image is being added. Doing so may damage the photo frame or memory card, or damage the data.
Tips
•To perform this operation using the remote control,
press the MENU button on the remote control and
then press v/V to select [Add to album] from 
(Editing) and then press 
.
•You can also use the MENU button on the photo frame.
•You can change the thumbnail size using [
/
] in the image list.
•Due to one of the characteristics of the internal memory device, images stored for long time or read many times may be subject to data error when read too often. We recommend that you perform a backup of your data periodically to avoid losing it.
Exporting an image
You can export the images in the internal memory to a memory card or external device.
1 Press MENU when an image stored on the internal device is displayed on the screen.
The menu is displayed.
2 Press B/b to select the 
(Editing) tab.
The screen used for editing is displayed.
3 Press v/V to select [Export] and then press 
.
The Export menu is displayed.
Single image display
4 Press v/V to select [Export this image], [Selected images] or [Export all images] and then press 
.
If you select [Export this image], the image currently displayed is exported to the device. Go to step 6. (This item cannot be selected on the slideshow display.)
If you select [Selected images], you can select the image you want to export from the image list. Go to step 5.
If you select [Export all images], the image list is displayed. A check mark is attached to the check box of all the images. Go to step 6.