Specifying the playback device
You can specify the memory card or external device to be displayed.
1 Press MENU.
The menu is displayed.
2 Press B/b to select the 
(Select device) tab.
The screen used for selecting a device is displayed.
Tip
Insert the device at this point during the procedure if the device you want to use cannot be selected.
3 Press v/V to select the device you want to display and then press 
.
The images of the selected device are displayed.
Tips
•You can also use the MENU button on the photo frame.
•The search is cancelled automatically when you change the playback device during a search.
Adjusting the image size and position
Enlarging/reducing an image
You can enlarge or reduce an image in single view mode.
1 To enlarge an image, press 
(zoom in) on the remote control. To reduce an enlarged image, press 
(zoom out).
Each press of the 
button enlarges the image further. You can enlarge an image to a maximum of 5 times the original scale. You can move an enlarged image up, down, left, and right.
About crop and save
•The screen currently displayed is saved as it was trimmed after you press B/b/v/V to move the enlarged image and then press the MENU button.
•You can select [Save as new image] or [Overwrite] by pressing the MENU button when the image is enlarged or reduced. Press v/V to select the method used to save the image.
•If you select [Save as new image], the image is saved as a new image.
•If you select [Overwrite], the image is overwritten. A confirmation screen is
displayed when you select [Overwrite]. Press
v/V to select [Yes] and then press 
to save the image. Press 
again when the confirmation screen is displayed after saving
is finished.
Notes
•Enlarging an image may reduce the quality depending on the image size.
•It is not possible to enlarge an image using the buttons on the photo frame.