Operating an external device connected to the photo frame

You can connect a mass-storage-complaint digital camera, a USB memory device, a photo storage device, or other external device to the photo frame and display an image directly from the external device.

Notes

•We cannot guarantee connection with all types of mass storage devices.

•The playback device will be switched to the external device if you connect the external device to the USB A/Bluetooth jack during playback the internal memory.

1 Connect the photo frame to the AC power source. (.page 18)

2 Set the digital camera or external device to mass storage connection mode.

The setting and operation method used before connecting differ depending on the digital camera or external device. Refer to the operating instructions supplied with the digital camera or external device. (If you are using a Cyber-shot, set “USB Connect” to [Normal] or [Mass Storage].)

3 Turn the photo frame to ON. (.page 19)

4 Connect the digital camera or external device to the USB A/ Bluetooth connector.

Use the USB cable supplied with the digital camera or external device to connect to the photo frame.

External memory or other external device

5 Select the playback device. (.page 40)

An image on the device is displayed on the screen.

For details on the slideshow, refer to page 29. For details on adding images to the internal memory, refer to page 32.

Notes

•When using a commercially available USB cable, use an A-Type USB cable that is less than 3 meters long.

•Do not disconnect the USB cable or turn the photo frame and external device off while the access lamp on the external device is flashing. Doing so may damage the data stored on the external device. Sony assumes no responsibility for any damage or loss of data.

•A USB hub or USB device with a built-in USB hub may not work properly.

•The photo frame cannot use data that has been encrypted or compressed using, for instance, fingerprint authentication or a password.

48 GB