OPERATING THE UNIT

Listening to music

VOL – buttonVOL + button POWER button

FF

REWCheck the following before operating the unit.–The Bluetooth device is turned on.–Pairing of this unit and the Bluetooth device is complete.

–The Bluetooth device supports the transmitting music function (profile: A2DP*).

1Press and hold the POWER button for about 3 seconds while the unit is turned off.

The indicator (blue) and indicator (red) flash together twice and the unit is turned on.

Notes

2Make the Bluetooth connection (A2DP) from a Bluetooth device to this unit.

Refer to the operating instructions supplied with the Bluetooth device on how to operate it.

3Start playback on the Bluetooth device.

Tip

Bluetooth connection of A2DP (Advanced Audio Distribution Profile) can also be operated with the jog switch from this unit to the Bluetooth device except when making a call on this unit.

Note

When you play music by connecting the unit to a Bluetooth device using HSP (Headset Profile), sound quality will not be high. For better sound, change the Bluetooth connection to A2DP by operating the Bluetooth device.

* For detail on profiles, see page 23.

•Do not press and hold the POWER button for more than 7 seconds, otherwise pairing mode is entered.

•After the unit is turned on, the unit attempts to connect to the last connected Bluetooth device automatically with HFP or HSP. To make or receive a call while listening to music, make ready the last connected Bluetooth device for HFP or HSP connection before

14

turning on the headset.

GB