OPERATING THE UNIT
Listening to music
VOL – | POWER button |
button | VOL + button |
| |
| Multi function |
| button |
Check the following before operating the unit.
–The BLUETOOTH device is turned on.
–Pairing of this unit and the BLUETOOTH device is complete.
–The BLUETOOTH device supports the transmitting music function (profile: A2DP).
1Press and hold the POWER button for about 3 seconds while the unit is turned off.
The indicator (blue) and indicator (red) flash together twice and the unit is turned on.
Note
Do not press and hold the POWER button for more than 7 seconds, otherwise pairing mode is entered.
2Make the BLUETOOTH connection (A2DP) from a BLUETOOTH device to this unit.
Refer to the operating instructions supplied with the BLUETOOTH device on how to operate it.
3Start playback on the BLUETOOTH device.
Notes
•When you play music by connecting the unit to a BLUETOOTH device using HSP (Headset Profile)*, sound quality will not be high. For better sound, change the BLUETOOTH connection to A2DP (Advanced Audio Distribution Profile)* by operating the BLUETOOTH device.
•This unit cannot control music playback functions of the connected device.
* For detail on profiles, see page 22.
To adjust the volume
While playing music, you can adjust the volume using the VOL button of this unit.
Tips
•When the volume level is low, raise the volume of the connected device. The sound will be clearer.
•Volume level for listening to music and calling can be set independently.
Continued 13
US
