Pairing
What is pairing?
BLUETOOTH devices need to be “paired” with each other beforehand.
Once BLUETOOTH devices are paired, there is no need for pairing again, except in the following cases:
•When pairing information is deleted after repair, etc.
•When this unit is paired with 9 or more devices.
This unit can be paired with 8 BLUETOOTH devices; if a new device is paired after 8 devices have been paired, the device whose latest connection time is the oldest among the 8 paired devices is replaced by the new one.
•When recognition of the unit by the device to be connected is deleted.
•When this unit is initialized.
All pairing information is deleted.
Procedures of pairing
1Place the connecting device within 1 m (3 ft) of this unit.
2Press and hold the POWER button for 7 seconds or more to standby for pairing while the unit is turned off.
Notes
•After about 3 seconds, power is turned on and the indicator (blue) and indicator (red) flash together twice. Keep the button pressed without releasing until both indicators start flashing together, then release the button. This unit enters into pairing mode.
•If pairing is not established within about 5 minutes, pairing mode will be canceled and this unit will turn off. In this case, start over from step 1.
Continued 9
US
