3 Connect the cables.
•Connect an unused power connector from the computer’s power supply to the DC input (power input) connector of the drive.
•Connect the supplied IDE flat cable to the IDE connector of the drive.
Hint
If your computer supports digital playback, you do not need to connect the audio cable to the analog audio connector. Most computers support digital playback at this time.
Pin1
DC input connector
Analog audio
connector
DC INPUT 5V GND12V
IDE connector
Power connector
Red (pin 1)
IDE flat cable
To computer motherboard
Notes
•The side of the IDE flat cable with the red line indicates the pin 1 conductor. Verify that the pin 1 side is connected to pin 1 on the motherboard.
•The power connector must be inserted with the inclined side upwards.
•If there is no spare power connector, you must use a “Y” adapter.
12