Sony DRX-820UL-T Connection through USB

DRX-820UL-T

2-680-628-11 (1)

masterpage:Left

F:\SuzukiA\#5120839_DRX-820UL-T\2680628111\2680628111_DRX820UL-T_OI\GB05SET.fm

Connection through USB

Note

This product including bundled software functions properly under Windows XP, Windows

2000, and Mac OS X (10.2 or later).

It may not fulfill all functional and performance specification under other OS (operating

system) environment.

• Refer to the list of contents to verify that the package contents are complete.

• If your computer is not equipped with a USB connector, install a USB

interface card.

• Have the manual for your computer handy.

These instructions apply to most commonly used computers.

For connection cautions, refer to the “Installation” section in “Connection

through i.LINK” on page11.

1Start your computer.

2Connect the necessary cables, then turn on the drive.

• Connect the USB cable to the drive’s USB connector.

• Connect the supplied AC power cord to the supplied AC adapter. Then

connect the AC adapter to the drive’s DC IN jack, and connect the power

cord to the power outlet.

Power Switch USB Cable

AC adapter AC power cord

GB01COV1.book Page 14 Friday, January 13, 2006 3:49 PM