DRX-820UL-T
2-680-628-11 (1)
masterpage:Right
9
Introduction
F:\SuzukiA\#5120839_DRX-820UL-T\2680628111\2680628111_DRX820UL-T_OI\GB04STA.fm
ABusy indicator
Indicates the drive status.
Lit: The drive is reading data,
playing back an audio CD, or
writing packets.
Blinking:
The drive is writing data
(disc-at-once, track-at-once),
formatting a disc, or
deleting1) data from a disc.
Off: The drive is in a state other
than those outlined above.
1) Some drives indicate this state with the lit
indicator.
BEject button
Press to open and close the disc tray.
CEmergency eject hole
If you cannot open the disc tray with the
eject button, turn off the drive, and then
insert a thin, elongated object into this
hole to eject the disc tray manually.
DDisc tray
Insert discs here, label side up.
Hint
When you insert a disc into the drive, make
sure that it is under the four pins. When using
the drive vertically, make sure that you set the
disc inside the two lower pins.
EPower Switch
Press to turn the drive on or off.
FUSB Connector
Used with a USB cable to connect the
drive to a computer.
Gi.LINK S400 Connector (6-pin)
Used with an i.LINK cable to connect
the drive to a computer.
Hi.LINK S400 Connector (4-pin)
Used with an i.LINK cable to connect
the drive to a computer.
IDC IN Jack
Connect the supplied AC power cord to
the AC power adapter. Connect this
assembly to the DC IN jack, and then
connect the whole to the AC outlet.
GB01COV1.book Page 9 Friday, January 13, 2006 3:49 PM