DRX-820UL-T
2-680-628-11 (1)
masterpage:Right
7
Introduction
F:\SuzukiA\#5120839_DRX-820UL-T\2680628111\2680628111_DRX820UL-T_OI\GB04STA.fm
System Requirements
The drive should be used with a system that
meets the following requirements1).

Windows

PC/AT-compatible computer
CPU: Pentium III, 800 MHz or higher
(with Nero Vision Express: Pentium 4,
1.6 GHz recommended)
RAM: 256 MB or higher
1 GB (with Nero Vision Express:
10 GB) free hard disk space
Operating system:
Windows 2000 Professional
(referred to as Windows 2000),
Windows XP Home Edition or
Windows XP Professional
(referred to as Windows XP)
i.LINK or USB connector

Macintosh

A Power Macintosh G3 or later capable
of running Mac OS X 10.2 or later
RAM: 256MB or more
200MB or more available hard disk
space
Operating system: Mac OS X 10.2 or
later
FireWire or USB connector
1) The above requirements are the minimum
necessary requirements to write to disc
normally. Under actual operating conditions,
the requirements imposed by your software
must also be met. For details, refer to your
software documentation.
Notes
These operating instructions include IEEE1394
and FireWire in the expression i.LINK.
You must use discs that are compatible with the
write speed you have selected.
• Writing speed may automa tically be adjusted
depending on the disc, specified disc speed, or
disc conditions such as weight imbalance and
eccentricity.
• System should meet following requirements in
order to use USB 2.0 operation with this device.
Hi-Speed USB (USB 2.0-compliant)
interface cable (included).
System equipped with a Hi-Speed USB (USB
2.0-compliant) connector or PCI adapter
card, and running the USB 2.0 EHCI device
driver1).
1) The USB 2.0 EHCI driver software is
supplied with currently available PCI
adapter cards that conform to USB 2.0.
You can also use the USB 2.0 EHCI driver
software supplied with Windows 2000 SP4
and Windows XP SP1.
For details, contact your USB 2.0 adapter
dealer or consult the Microsoft
Corporation Web site.
• When connected to a product that does not
support Hi-Speed USB, the maximum transfer
rate is limited to 12 Mbps (equivalent to a USB
1.1 transfer rate).
• For a Mac intosh, depending on the
specifications of your computer, you may not be
able to achieve the proper read/write speeds
because the USB transfer rate is limited.
• You cannot use the i.LIN K and USB interfaces
simultaneously.
GB01COV1.book Page 7 Friday, January 13, 2006 3:49 PM