Table of
contents
Operation
Search
MENU/Settings
Search Index
113GB

The remaining charge indicator is incorrect.

• This phenomenon occurs when you use the camera in an extremely hot or cold location.
•A discrepancy arose between the remaining charge indicator and the actual remaining battery charge.
Fully discharge the battery pack once, then charge it to correct the indication.
• Battery capacity decreases over time and through repeated use. If decreased usage time between
charges becomes significant, it is probably time to replace it with a new one.

Cannot charge the battery pack.

• You cannot charge the battery pack using the AC Adaptor (sold separately). Use the battery charger
to charge the battery.

The CHARGE lamp flashes while charging the battery.

•Remove and reinsert the battery pack, making sure it is installed correctly.
• The temperature may be inappropriate for charging. Try charging the battery pack again within the
proper charging temperature range (10 °C to 30 °C (50 °F to 86 °F)).
•Refer to page 128 for details.

Cannot record images.

• If images are recorded on the internal memory even when a memory card is inserted into the camera,
make sure that the memory card is fully inserted into the camera.
• Check the free capacity of the internal memory or memory card. If it is full, do one of the following:
– Delete unnecessary images (page 38).
– Change the memory card.
•You cannot record images while charging the flash.
• For recording movies, it is recommended that you use a memory card of 1 GB or larger.
•S et [Demo Mode] to [Off] (page83).

Smile Shutter function does not work.

•No image is shot if a smiling face is not detected.
•S et [Demo Mode] to [Off] (page83).

Anti-blur function does not work.

•The anti-blur function may not work properly when shooting night scenes.
• Shoot after pressing the shutter button halfway down.
•If camera shake is excessive, the anti-blur function may not be effective even when [SteadyShot] is
activated.

Recording takes a long time.

•W hen the shutter speed becomes slower than a certain speed in low light conditions, the NR (Noise
Reduction) slow shutter function is activated automatically to reduce the image noise. Under such
conditions, recording takes a long time.
•T he Anti Blink function is working. Reset [Anti Blink] to [Off] (page61).
Shooting still images/movies