Setup 4

For details on the operation t page 61

4

The default settings are marked with .

Calibration

Enables you to perform calibration when the touch panel buttons do not react at the appropriate points where you touch.

Using the stylus, touch the × mark displayed on the screen.

To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that point are not effected.

Calibration 1/3

Touch the "X"

Cancel

The × mark moves on the screen.

If you fail to press the right spot, the calibration is not performed. Press the × mark again.

Housing

Changes the function of some buttons to operate the camera installed in the Marine Pack.

 

On (

)

Changes the function of the buttons.

 

 

 

 

 

Off

 

Does not change any functions.

 

 

 

 

The buttons will work as follows when the setting is [On].

– (Screen display on/off) button: Flash button for shooting. It does not work for viewing.

– / (zoom) button: Zoom button for shooting, Previous/next image button for viewing

•Macro recording is activated automatically when the setting is [On].

•For details, see the operating instructions supplied with the Marine Pack.

74