Sony DSC-N1 Stage 4-A:Copying images to a computer, Stage 3: Connecting the camera and your computer

Stage 3: Connecting the camera and your computer

2To the multi connector

1 To a USB connector

Cable for multiuse terminal (supplied)

•Set the switch on the supplied cable for multi-use terminal to “CAMERA”.

CAMERA TV

DISP SEL

•With Windows XP, the AutoPlay wizard appears on the desktop.

“USB Mode Mass Storage” appears on the screen of the camera.

When a USB connection is established for the first time, your computer automatically runs a program to recognize the camera.

Wait for a while.

*During communication, the access indicators turn red. Do not operate the computer until the indicators turn white.

•If “USB Mode Mass Storage” does not appear, set [USB Connect] to [Mass Storage] (page 72).

Stage 4-A: Copying images to a computer

•For Windows 98/98SE/2000/Me, follow the procedure explained in “Stage 4-B: Copying images to a Computer” on page 81.

•For Windows XP, when the wizard screen does not appear automatically, follow the procedure explained in “Stage 4-B: Copying images to a Computer” on page 81.

This section describes an example of copying images to the “My Documents” folder.

computer your Using