2 To a wall outlet (wall socket)

Power cord (mains lead)

1

4 AC power adaptor

,Connect the power cord (mains lead) to the AC power adaptor and to a wall outlet (wall socket).

Charging starts, and the /CHG lamp lights.

/CHG

/CHG lamp

When the/CHG lamp goes out, charging is finished (full charge).

•When charging is finished, disconnect the AC power adaptor both from the camera and the wall outlet (wall socket).

To remove the battery pack

Battery eject lever

Open the battery/“Memory Stick” cover, and push down the battery eject lever in the arrow direction as illustrated above.

•Make sure you do not drop the battery pack when you remove it.

Battery remaining indicator

The battery remaining indicator shows the remaining shooting or viewing time.

60min

1600 FINE

 

4

•It takes about 1 minute that the proper remaining time is calculated.

•A proper remaining time may not be indicated depending on conditions of use or circumstances.

Charging time

This represents the time required to charge fully depleted battery pack using the supplied AC-LS1A AC power adaptor in an environment where the ambient temperature is 25°C (77°F).

Battery pack

Full charge

 

(min.)

 

 

NP-FC10 (supplied)

Approx.150

 

 

started Getting

11