POWER
POWER
0EV |
ON/OFF(CHG)
POWER lamp
,Press POWER.
The POWER lamp lights in green, the power is on. When you turn on your camera for the first time, the CLOCK SET screen appears (see the next page).
To turn off the power
Press POWER again, the POWER lamp goes out, and the camera turns off.
•If you turn the power on when the mode dial is
set to SCN, 
, or 
the lens comes out. Please be careful not to touch the lens.
If no tasks are performed for a while* when shooting, viewing images, or setting up the camera while using the battery, power is automatically shut off to preserve battery power.
However, in the following circumstances, even if the battery is being used to power the camera, the Auto Power Off function will not work.
•Movies are being played back
•A slide show is being shown
•A cable is connected to the USB jack or the A/V OUT (MONO) jack
*When [POWER SAVE] is set to [ON]: approximately 90 seconds
When [POWER SAVE] is set to [OFF]: approximately three minutes
0EV |
|
|
EV | WB | ISO |
AUTO
WHITE BAL 
ISO
To change the current settings of the camera, bring up the menu or the SET UP screen (page 50), and use the control button to make the changes.
For each item, press v/V/b/B to select the desired value, then press the center z or b/B to make the setting.
14