Settings

For details on the operation 1 page 67

Calibration

Enables you to perform calibration when the touch panel buttons do not react at the appropriate points where you touch.

Using the paint pen, touch the × mark displayed on the screen.

To stop the calibration process mid-way, touch [Cancel]. The adjustments made up to that point are not effected.

The × mark moves on the screen.

If you fail to press the right spot, the calibration is not performed. Press the × mark again.

Housing

Changes the function of some buttons to operate the camera installed in the Marine Pack.

 

On (

)

Changes the function of the buttons.

 

 

 

 

 

Off

 

Does not change any functions.

 

 

 

 

The buttons will work as follows when the setting is [On].

–Objects cannot be brought into focus by touching the screen.

–When [Spot AF] is selected, operation brings the center section into focus.

–During playback, playback zoom operation cannot be performed.

–During playback, sliding the zoom (W/T) lever moves screen playback forward or backward.

–The screen display is always [Normal].

–Some functions are limited. (The icons are not displayed.)

• For details, see the operating instructions supplied with the Marine Pack.

72