1Turn on your computer, and set the supplied
The model selection screen appears.
2Click
The installing menu screen appears.
3Click [USB Driver].
The “USB Driver” screen appears.
4
5Drag and drop the following two files from the screen opened in step 3 into the System Folder icon in the screen opened in step 4.
•Sony USB Driver
•Sony USB Shim
6When the message for confirmation is shown, click [OK].
7Restart your computer, then remove the
For details, see page 57.
Disconnecting the USB cable from your computer or removing the “Memory Stick Duo” from your camera during USB connection
Drag and drop the drive icon or the “Memory Stick” icon to the “Trash” icon, then disconnect the USB cable or remove the “Memory Stick Duo.”
•If you are using Mac OS X v10.0, disconnect the USB cable, etc., after you have turned your computer off.
cCopying images1
The contents of the “Memory Stick Duo” inserted in your camera appear.
2
3
4Drag and drop the image files to the hard disk icon.
The image files are copied to your hard
disk.
•See page 62 for details about the image file storage destinations and file names.
1
2
•The image recorded in mirror mode may be displayed inverted by 180 degrees, depending on the software you use.
To modify the inverted image, use the rotate tool of the software.
•Close down all applications running on the computer before installing the USB driver and application.
•You can use the “ImageMixer Ver.1.5 for Sony” software to copy images to your computer, to view images on your computer, and to create video CDs. See the operation manual supplied with the
•“ImageMixer” is not compatible with Mac OS X.
•“Image Transfer” cannot be used with Macintosh.
computer your on images Enjoying
65