4

,Close the inner cover and slide it in the direction of the arrow to lock it.

Close the inner cover while holding the batteries in. Make sure the cover is closed securely.

To remove the batteries

Perform steps 1and 2and remove the batteries.

Be careful not to drop the batteries when opening or closing the inner cover.

,Inspect the waterproof cover.

Inspect the O-ring and the O-ring mating surface for scratches, deformation, dirt, hair or other problems.

Note that if the O-ring and the O-ring mating surface are damaged, dirty or have other problems, the waterproof performance may be impaired. In this case, water may enter the inside of the camera and cause irreparable damage.

Replace the O-ring with a new one if it becomes scratched or deformed, or after approximately two years of use even if there are no problems (page 81).

started Getting

,Close the waterproof cover.

Close the waterproof cover and slide the slide lock lever back into place until the OPEN button clicks.

When using the camera underwater or in places exposed to water, slide the lock switch (page 9) to lock the waterproof cover. This prevents the waterproof cover from opening by accident.

13