x“Memory Stick” that you

can use

“Memory Stick Duo”

You can also use a “Memory Stick PRO Duo” or “Memory Stick PRO-HG Duo” with the camera.

 

For details on the number of images/time that

Getting

can be recorded, see pages 26, 29. Other types

of “Memory Stick” or memory card are not

compatible with the camera.

 

 

“Memory Stick”

 

You cannot use a “Memory Stick” with the

started

camera.

 

xTo remove the “Memory Stick Duo”

Access lamp

Make sure that the access lamp is not lit, then push the “Memory Stick Duo” in once.

Note

•Never remove the “Memory Stick Duo”/ battery pack when the access lamp is lit. This may cause damage to data in the “Memory Stick Duo”/internal memory.

xWhen there is no “Memory Stick Duo” inserted

Images are stored in the camera’s internal memory (approximately 15 MB).

To copy images from the internal memory to a “Memory Stick Duo,” insert the “Memory Stick Duo” in the camera,

touchand select [Copy] in [Memory Tool] of (Manage Memory) (page 44).

xTo remove the battery pack

Battery eject lever

Slide the battery eject lever. Be sure not to drop the battery pack.

xChecking the remaining battery charge

A remaining charge indicator appears on the upper left of the LCD screen.

HighLow

Notes

•It takes about one minute until the correct remaining charge indicator appears.

•The remaining charge indicator may not be correct under certain circumstances.

•If the NP-FD1 battery pack (not supplied) is used, the minute display is also shown after the remaining charge indicator.

•Battery capacity decreases over time and through repeated use. When the operating time per charge decreases markedly, the battery pack needs to be replaced. Purchase a new battery pack.

16