Changing camera settings
Changing the screen display
1 Touch t desired mode t . (Normal): Displays buttons and icons(Simple): Displays only buttons (Image Only): Hides buttons
and icons
Note
• disappears from the screen if [Image Only] playback is selected. To display the buttons, touch the center of the screen. The [Normal] display returns temporarily.
zHistogram and brightness settingsThe following setting can be accessed by touching .
Histogram: A histogram is a graph showing the brightness of an image. The graph display indicates a bright image when skewed to the right side, and a dark image when skewed to the left side.
Brightness: This sets the backlight brightness ([Normal]/[Bright]). When viewing images in bright outside light, reset to [Bright]. However, the battery power may decrease faster under such condition.
Changing the operation sounds
You can set the sound produced when you operate the camera.
1 Toucht(Settings) t [Main Settings] t t [Beep] tt desired mode t .42
Shutter: Turns on the shutter sound when you press the shutter button. On: Turns on the beep/shutter sound when you operate the touch panel/ press the shutter button.
Off: Turns off the beep/shutter sound.