3 Fit the attachment plate on the rear side of the CA-WR855 to the V-groove on the battery attachment interface, and then slide the CA-WR855 down until it connects to the WRR connector.

4 Set one of the AUDIO IN (CH- 1/CH-2) switches to

WIRELESS.

To connect a WRR-810A/860A

Attach the WRR tuner fitting (not supplied) (Part No. A-8278-057-A) to the rear of the camcorder as shown in the following figure.

2,3

CA-WR855

4

5

Connections and Fitting 2 Chapter

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

4

 

 

WRR-810A/860A

1 Pass a screwdriver through the holes and tighten the screws .

2 Loosen the adjustment screws.

3 Adjust the metal fitting position for a battery pack to be attached, and tighten the adjustment screws to fix its position.

4 Attach the holder kit (two fittings and four screws, supplied with the tuner) to the WRR tuner fitting (one for the upper position and the other for the lower position).

5 Mount the tuner on the WRR tuner fitting.

For details about the WRR tuner fitting (Part No. A-8278- 057-A), contact your Sony dealer.

Chapter 2 Fitting and Connections

47