Viewfinder Advanced Menu

Advanced Menu Operations

See also the figure on next page.

To display the advanced menu

Move the POWER switch to the ON position while holding down the MENU dial.

Note

The advanced menu does not appear when the camcorder is in EZ mode.

Take the camcorder out of EZ mode first.

To reinitialize all settings in the advanced menu to their factory defaults

1)Align the cursor to ALL RESET and press the MENU dial. (The indication changes to “ALL RESET SURE?”.)

2)Press the MENU dial again. (The indication changes to “ALL RESET OK” and reinitialization completes.) To cancel the reinitialization, turn the MENU dial (without pressing).

Note

When using the VCL-716BX Zoom Lens, after performing the above operations, set LENS SEL (see page 102) to 3.

Menus and Indications Screen Viewfinder 4 Chapter

To change the page

Align the cursor to the page number and press the MENU dial so that the page number is blinking. Turn the dial until the desired page.

To select items in a page

Press the MENU dial to blink the cursor, and press the MENU switch to move the cursor among the menu items. While the cursor is blinking, you can move the cursor by turning the MENU dial.

To change settings

This operation is the same as for the basic menus.

For a description of basic menu operations, see page 92.

98 Chapter 4 Viewfinder Screen Indications and Menus