Symptoms | Cause | Remedy | |
The equipment connected to the | It sometimes takes time for the connected | Wait for about 15 seconds. If the connected | |
camcorder via an i.LINK connection | equipment to recognize the operation. | equipment still does not react, do the | |
does not react as expected, for |
| following. | |
example, the video image does not |
| • | Check the i.LINK connection, for example, |
appear on its screen. |
|
| by |
|
| • | Turn the power off, and connect the cable |
|
|
| again. |
|
| • | Change the i.LINK cable. |
|
|
| |
The camera is not recognized by | There is a problem with the software, for | Install software that supports the DVCAM | |
the PC that is connected to the | example, it does not support the DVCAM | format. | |
i.LINK connector. | format, etc. |
|
|
|
|
| |
The camera is not controlled by the | There is a problem with the software, for | Install software that supports the DVCAM | |
PC that is connected to the i.LINK | example, it does not support the DVCAM | format. Or set the REC TRIGGER switch to | |
connector. | format, etc. | INT. | |
|
|
|
|
Appendix 7 Chapter
Troubleshooting 129