Indication | Description |
J Lithium backup battery warning | Appears when the voltage of the internal lithium backup battery (CR2032) is low. If this |
| indication appears, replace the lithium backup battery immediately. |
| For further information about replacing lithium battery, see “Inserting and Replacing |
| the Lithium Battery” (page 31). |
|
|
K DVCAM indication | Disappears when the cassette being played back is not for DVCAM format. |
|
|
L Cassette memory indication | Appears when using a cassette with cassette memory. |
|
|
M Audio mode indications | These show audio recording/playback mode. |
| Fs32k: |
| Fs48k: |
| For further information about selecting audio recording mode, see “Menu 212 |
| Selecting Audio Recording Mode” (page 109). |
|
|
N Warning indications | Include the following. |
| RF: Appears when the video heads are clogged, or when there is a fault in the |
| recording system. |
| SERVO: Appears when the servo lock is not functioning. |
| HUMID: Appears when there is condensation on the drum. |
| SLACK: Appears when there is a tape winding fault. |
| For measures against warning indications, see “Warning System” (page 127). |
|
|
O Service indication | Appears during maintenance or VCR menu operations (page 103). It does not appear |
| during normal operation. |
|
|
P Battery capacity indication | This indicates the battery capacity and voltage as shown below. |
| Change menu setting for the battery you are using. |
For menu settings, see “Menu 206 Selecting Battery Capacity Indication” (page 106).
|
|
| Battery voltage | |
Indication |
|
| ||
|
|
| L60A/L90/L90A |
|
|
|
|
| |
|
|
| ||
BATT E[xxxxxx]F | 15.0 V or more | 12.5 V or more | ||
BATT E[xxxxx ]F | 14.0 to 15.0 V | 12.0 to 12.5 V | ||
BATT E[xxxx | ]F | 13.0 to 14.0 V | 11.75 to 12.0 V | |
BATT E[xxx | ]F | 12.0 to 13.0 V | 11.5 to 11.75 V | |
BATT E[xx | ]F | 11.3 to 12.0 V | 11.3 to 11.5 V | |
BATT E[xx | ]F (blinking)1) | 11.25 to 11.3 V | 11.25 to 11.3 V | |
BATT E[x | ]F (blinking) | 11.0 to 11.25 V | 11.0 to 11.25 V | |
BATT E[ | ]F (blinking) | 11.0 V or less | 11.0 V or less | |
1)Replace the battery pack when this indication appears.
(Continued)
Overview 1 Chapter
Chapter 1 Overview 17