3 Turn the MENU dial until the desired character appears, and press it.

The character cycles through the following sequence.

ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789?;x/: -.,

(Space)

4 Turn the MENU dial to move the text entry arrow.

5 Return to step 3 and repeat the text entry procedure.

6 After completing text entry, move the text entry cursor to the parenthesis position.

The display changes as follows.

MARK/CUE: MARK

CHG REEL NO. mWRITE(YESmPUSH)

(DEF )

Basic menu pages 8 and 9

You can create a title of up to four lines, each of twelve alphanumeric or punctuation characters, and then save it. It is then possible to record the title over the picture while shooting.

Note

You cannot set the skin detail correction while a title is displayed.

Entering the title (basic menu page 8)

1 Press the MENU switch or turn the MENU dial as necessary to display basic menu page 8 (title setting display) in the viewfinder.

mTITLE SET( YES mPUSH)

7 Check your cassette name/number setting, and press the MENU dial if no more changes are required. (To make changes or to abort the procedure for this setting, return to step 2.)

This writes the new cassette name/number to the cassette memory, after which the display changes as follows.

MARK/CUE: MARK mCHG REEL NO.

DONE

If a title is already present, it appears on this screen.

2 Press and turn the MENU dial until the desired character appears.

The character cycles through the following sequence.

ABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789?;x/: -.,

(Space)

Press the MENU dial when the desired character appears.

(Continued)

Menus and Indications Screen Viewfinder 4 Chapter

Chapter 4 Viewfinder Screen Indications and Menus 83