Sony 500WSPL, DSR-500WSL manual 89

Advanced menu page 4

PAGE4 (NEXTm$ PREVm4)

MARKER : CENT/90%

LIMITS : OFF mZEBRA : 1

a)

ZEBRA1 : 70IRE

REC TIME: INT

VF TALLY: ⋅ 2

LENS SEL: 1

EXIT MENU (YESmPUSH)

a) For DSR-500WSPL: 70%

Item	Settings
MARKER	CENT/90% (normal value):
Selects ON/OFF	Displays center marker and safety
setting for center	zone marker at 90% size.
marker, size setting	CENT/80%: Displays center
(percentage of	marker and safety zone marker at
viewfinder screen	80% size.
area), and display ON/	90%: Displays only safety zone
OFF setting.	marker at 90% size.
	80%: Displays only safety zone
	marker at 80% size.
	CENT: Displays only center
	marker.
LIMITS	OFF (normal value): Displays the
	image inside the safety zone
	according to the scan size.
	4:3: Displays the image inside the
	4:3 safety zone during 16:9 scan
	size.
	14:9: Displays the image inside
	the 14:9 safety zone during 16:9
	scan size.
ZEBRA	1 (normal value): Displays the
Selects type of zebra	zebra pattern over parts having a
pattern display.	video level. between 70 and 90
	IRE (or 70 and 90%).
	Use the next item (ZEBRA1) to
	select the base level.
	2: Displays the zebra pattern over
	parts having video levels of 100
	IRE or above (or 100% or above).
	1/2: Dual display (both 1 and 2)
ZEBRA1	70 IRE (normal value) to 90 IRE
Sets base level for	or 70% (normal value) to 90%:
zebra pattern 1.	Can be set for each IRE step or
	1% step.
REC TIME	INT (normal value): Recording
Selects whether to	time of the internal VCR
show the recording	EXT: Recording time of the
time (TTL) of the	external VCR connected to the
internal VCR or of the	VTR connector (26-pin).
external VCR.
VF TALLY	⋅1: Uses only the upper REC/
Selects whether or not	TALLY indicator.
to use more than one	⋅2 (normal value): Uses two
REC/TALLY indicators	REC/TALLY indicators.
in the viewfinder
(displayed only when
the DXF-701WS/
701WSCE viewfinder
is attached).

Item	Settings
LENS SEL	1 (normal value), 2,3,4
Select the types of the lens.	For details, see “Designating
	the lens” on page 121.

Advanced menu page 5

PAGE6 (NEXTm$ PREVm4)

mSS IND: ALWAYS

LL IND: ON

IRIS IND: ON

GAIN IND: ON

FILTER IND: ON

WHITE IND: ON

SKIN IND: ON

EXIT MENU (YESmPUSH)

Item	Settings
SS INDa)	3SEC: Displays shutter
Selects the mode for	setting for three seconds only
showing the shutter setting	when the setting has been
when displaying the normal	changed.
indications.	ALWAYS (normal value):
	Displays the shutter setting at
	all times.
LL INDa)	ON (normal value):
Selects whether or not to	Displays.
show the LOW LIGHT	OFF: Not display.
indication on the normal	ON (normal value):	4Chapter
IRIS INDa)
indications when inadequate
lighting is detected.
Selects whether or not to	Displays.	Viewfinder
show the lens’s F-stop value	OFF: Not display.
(iris indication) on the
normal indications. The F-		Screen
displayed when in EZ mode.
stop value is always
		Indications
GAIN INDa)	ON (normal value): Always
Selects whether or not to	displays.
always show the gain	OFF: Displays for two
setting indication on the	seconds only when the	and
normal indications.	setting has been changed.
		Menus
FILTER INDa)
Selects whether or not to	ON (normal value): Always
always show the FILTER
control setting indication on	displays.
the normal indications.	OFF: Displays for two
The FILTER control setting	seconds only when the
indication is always	setting has been changed.
displayed when in EZ mode.
WHITE INDa)	ON (normal value): Displays.
Selects whether or not to	OFF: Not display.
show the setting of the white
balance switch.
SKIN INDa)	ON (normal value): Displays.
Selects whether or not to	OFF: Not display.
show the setting for skin
detail correction.

a)When the viewfinder’s DISPLAY switch is set to OFF, indications related to these items are not displayed even when menu settings are set to ON.

Chapter 4 Viewfinder Screen Indications and Menus 89