Chapter 2 Power Preparations and Connections
Chapter 2 Power Preparations and Connections 29

Chapter2

Power Preparationsand Connections

Power Preparations

This unit can be powered by batteries or AC power.
Example battery packs and AC adaptors that can be used are shown below.
Note
If you attach or remove batteries or AC adaptors incorrectly, they may fall
down and cause body injury.
Follow the procedures described below to attach or remove them.
Usable Batteries
Batteries that can be used with this unit are as follows. For each type of
battery, a special battery adaptor and battery charger is required.
Battery Battery Adaptor Battery Charger
BP-90/90A (mounted on this unit) DC-L90 BC-210/210CE/
410/410CE
Battery pack Battery
adapter Battery pack AC adaptor
BP-90A DC-L90
BP-L60/BP-L60A/
BP-L90/BP-L90A
AC-DN2A AC-550/
550CE
BP-90/90A (connected to DC IN
connector) DC-210 BC-210/210CE/
410/410CE
BP-L60/L60A/L90/L90A Not needed BC-L100/L100CE/
L50
In the subsequent pages, the batteries such as the BP-90/90A and BP-L60/
L60A will also be referred to as the BP-90(A) and BP-L60(A).
CMA-8A/
8ACE