Power Preparations
Chapter 2 Power Preparations and Connections
34 Chapter 2 Power Preparations and Connections
1Remove the cover of the battery connector.
2Insert the V-wedge shoe on the AC-DN2A in the V-groove on one unit
and slide the AC-DN2A until the battery charging connector is
connected to the battery connector.
3Use the DC power cord (supplied with the AC-DN2A) to connect the
DC output connector on the AC-DN2A and the DC IN connector on
the rear of another unit.
4Supply the AC-DN2A with AC power.
For information about how to supply AC power to the AC-DN2A, refer to the
manual for the AC-DN2A.
Battery charging
connector
Battery connector
DC IN
To DC output connector
DC power cord
(supplied with the AC-DN2A)