Selecting an Edit Mode
Chapter 3 Editing
48 Chapter 3 Editing

Insert Editing

In insert editing, you insert video, audio, and timecode at desired positions
on an already recorded tape. You can insert all three types of data at the
same time, or insert one of the types separately.
Note
Before you use an unrecorded tape in insert editing, video signal such as
black signal and timecode must be recorded on all over the tape.

Selecting insert mode

1Press the RECORDER button on the recorder control panel.
The RECORDER indicator lights.
2Press one or more of the INSERT buttons on the recorder control panel
to select the signals you want to insert.
The corresponding INSERT indicators light.
To cancel insert mode
Press the lit INSERT buttons again to turn the corresponding indicators
off. Selection of a signal is canceled when its indicator goes out.
1
2
VIDEO
CH1,1/2 CH2,3/4
AUDIO
INSERT TC
RECORDER