Chapter 5 Special Editing and Recording/Playback
Chapter 5 Special Editing and Recording/Playback 79
This section describes recording of external input
signals using this unit as a recorder.
Notes
•When two DSR-70/70P units are combined, set both
REMOTE/LOCAL switches to LOCAL.
•When controlling this unit from the editing control
unit connected to the REMOTE connector, set the
REMOTE/LOCAL switch to REMOTE.

Preparations for Recording

Perform the following procedure.
1Connect the source signals.
2Select video and audio signals which you want to
record (see step
5
on page 39).
3Make settings for time data (see page 61).
To adjust audio input levels
Set the AUDIO INPUT PRESET/VARIABLE switch
on the control panel to VARIABLE. Turn the AUDIO
INPUT CH-1 and CH-2 knobs, monitoring the input
levels indicated by audio level meter.

Recording Operation

Confirm that the REC INHI indicator on the control
panel is not lit.
Then, follow the procedure below.
1Press the REC/SEQ and PLAY buttons at the same
time.
Recording starts and the POWER indicator turns to
red.
2Press the STOP button to stop recording.
If recording continues to the end of the tape, the
tape automatically rewinds to the beginning and
stops.
Recording
21
EJECT REW PLAY F FWD
SERVO
CH-1/2
CH-3/4
PREROLL REC SEQ EDIT
METER
REC
INHI
)
0
r
p
6
4
STOP
STANDBY