D-1 : Connecting to the 5.1ch input jacks

You can enjoy 5.1ch surround sound using the internal Dolby Digital, DTS, or Super Audio CD Multi decoder of this player. (when 6 speakers are connected, set “SURROUND” to “OFF.”)

You can also enjoy Dolby Surround (Pro Logic) sound, or surround sounds using various “SURROUND” modes (page 70).

D-2 : Connecting to a digital jack

This connection will allow you to use the Dolby Digital, or DTS decoder function of your AV amplifier (receiver). You are not able to enjoy the surround sound effects of this player.

zHints

•For correct speaker placement, refer to the instructions of the connected components.

•To enhance the sound performance:

–Use high-performance speakers.

–Use front, rear, and center speakers of the same size and performance.

–Place the subwoofer between the left and right front speakers.

• Use connection D-2when connecting to 7 or more speakers (6.1ch or more).

Notes

For connection D-2

•After you have completed the connection, be sure to set “DOLBY DIGITAL” to “DOLBY DIGITAL” and “DTS” to “DTS” in Quick Setup (page 29).

•When you connect an amplifier (receiver) that conforms to the 96kHz sampling frequency, set “48kHz/96kHz PCM” in “AUDIO SETUP” to “96kHz/24bit” (page 93).

•Super Audio CD audio signals are not output from the digital jack.

28