Audio connection (pages 24 to 27)

A

• No additional settings are needed.

B-1 C-1

•Set “DOWNMIX” to “DOLBY SURROUND” (page 93).

B-2 C-2 D-2

•Set “DOWNMIX” to “DOLBY SURROUND” (page 93).

•Set “DIGITAL OUT” to “ON” (page 93).

D-1

•Set “DISTANCE,” “LEVEL (FRONT),” and “LEVEL (REAR)” according to the connected speakers (page 94).

zHints

• For connections B-1C-1D-1

If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 92).

• For connections B-2C-2D-2

Set “48kHz/96kHz PCM” to “96kHZ/24bit” only if you connect an amplifier (receiver) that conforms to the 96 kHz sampling frequency (page 93).

•The speaker size settings made in steps 16 to 20 will also apply when a Super Audio CD is played. To change the settings for Super Audio CDs, select “SUPER AUDIO CD t” in “SPEAKER SETUP” and adjust the “SIZE” settings (page 94).

32