3 Set the following items in the order that they are explained below.
The default settings are underlined.
To return to the default setting
Select the item, then press CLEAR. Note that only the “SIZE” setting does not return to the default setting.
◆SIZE
Selects the size of the speakers.
• FRONT
LARGE | Normally select this position. |
|
|
SMALL | Select this when the speaker |
| cannot reproduce adequate bass |
| frequencies. |
|
|
• CENTER |
|
|
|
LARGE | Normally select this position. |
|
|
SMALL | Select this when the speaker |
| cannot reproduce adequate bass |
| frequencies. |
|
|
NONE | Select this if you do not connect |
| a center speaker. |
|
|
• REAR |
|
|
|
LARGE | Normally select this position. |
(REAR/ | Select according to the rear |
SIDE) | speakers position*. |
|
|
SMALL | Select this when the sound |
(REAR/ | distorts or the surround effects |
SIDE) | are difficult to hear. |
| Select according to the rear |
| speaker position*. |
|
|
NONE | Select this if you do not connect |
| rear speakers. |
|
|
* Rear speaker position
Correctly specify the location of the rear speakers to enjoy the surround effect.
•Set to “SIDE,” if the location of the rear speakers corresponds to section A below.
•Set to “REAR,” if the location of the rear speakers corresponds to section B below.
This setting affects only “VIRTUAL REAR SHIFT,” “VIRTUAL MULTI REAR,” and “VIRTUAL MULTI DIMENSION” mode (page 72).
|
|
|
|
|
|
|
|
|
|
|
|
|
| 90 |
| ||
|
| 45 |
| ||
|
|
|
|
|
|
|
| 20 |
| ||
• SUBWOOFER | |||||
|
|
|
|
|
|
YES | Select this if you connect a | ||||
|
| subwoofer to output the LFE | |||
|
| (low frequency effect) signals | |||
|
| from the subwoofer. | |||
|
|
|
|
|
|
NONE | Select this if you do not connect | ||||
|
| a subwoofer. | |||
|
|
|
|
|
|
Notes
•The cut off frequency for the subwoofer is fixed at 120 Hz.
•If your speakers are too small to reproduce low bass frequencies, utilize a subwoofer for low frequency sound. When you set the speaker settings to “SMALL,” the bass redirection circuitry will be activated and the bass frequencies for the speakers are output from the subwoofer.
•Even if there are fewer than 6 speakers connected, the player distributes the audio signal components to the front speakers.
◆DISTANCE
Sets the distance from your listening position to the speakers.
Set the distance to your front speakers in “FRONT” first (A). Then adjust the values in “CENTER” (center speaker B), “REAR” (rear speaker C), and “SUBWOOFER” (D) to reflect the actual distance to your center speaker, rear speakers, and subwoofer.
Adjustments and Settings
c continued | 95 |
|