•48kHz/96kHz PCM (DVD VIDEO only) Selects the sampling frequency of the audio signal.
48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit.
96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit.
Notes
•Even if you set “48kHz/96kHz PCM” to “96kHz/ 24bit,” the sampling frequency is converted to 48kHz/16bit when a “SURROUND” mode (page 70) is selected.
•The analog audio signals from the LINE OUT AUDIO L/R jacks and 5.1CH OUTPUT jacks are not affected by this setting and keep their original sampling frequency level.
(SPEAKER SETUP)
To obtain the best possible surround sound, input the size of the speakers you have connected and their distance from your listening position. Then use the test tone to adjust the volume and balance of the speakers to the same level.
This setting is effective when connecting a speaker with 5.1 CH OUTPUT jacks (page 27).
You can create two different Speaker Setup settings, one for Super Audio CDs and one for all other types of discs.
1 Follow steps 1 through 4 of “Using the setup display” (page 87) to select “SPEAKER SETUP” in the Setup display.
SPEAKER SETUP
DVD:
SUPER AUDIO CD:
2 Select “DVD” or “SUPER AUDIO CD” using X/x, then press ENTER.
Example: when “DVD” is selected.
SPEAKER SETUP (DVD)
SIZE:
DISTANCE:
| LEVEL(FRONT): |
|
|
|
| ||
| LEVEL(REAR): | OFF | |||||
| TEST TONE: | ||||||
|
| FRONT: |
|
| LARGE | ||
|
| CENTER: |
|
| LARGE | ||
|
| REAR: | LARGE(REAR) | ||||
|
| SUBWOOFER: |
|
|
| YES | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
94