5.1 Channel Surround Hookups

With DVDs which contain DTS, Dolby* Digital or MPEG AUDIO sound, you can enjoy the sorround sound while producing the effect of being in a movie theater or a concert hall, using a digital component with a built-in DTS, Dolby Digital or MPEG decoder (not supplied). The player outputs the surround sound signals from the OPTICAL and COAXIAL connectors.

Using a receiver (amplifier) having the OPTICAL or COAXIAL connector and the 5 (+1) speakers, you can enjoy more real audio presence in the comfort of your own home.

Required cords

Audio cords (not supplied)

One for the LINE OUT (AUDIO 1, 2) jacks

White (L)

White (L)

Red (R)

Red (R)

Optical or coaxial digital cord (not supplied)

One for the OPTICAL or COAXIAL jack

or

S video cord (supplied)

One for the S-VIDEO jack

Connect the component via the OPTICAL or COAXIAL connector using an optical or coaxial digital connecting cord (not supplied). You do not need to connect both of these cords. See the figure on the next page.

Setups for the player

Some setups are necessary for the player depending on the components to be connected.

Use the setup display to change the various settings. For details on using the setup display, see page 42.

•When you play a DVD that is ecorded in DTS format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DTS” to “ON” in the setup display (page 51).

•When you play a DVD that is ecorded in Dolby Digital format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “DOLBY DIGITAL” to “DOLBY DIGITAL” in the setup display (page 51).

•When you play a DVD that is ecorded in MPEG format

Set “DIGITAL OUT” in “AUDIO SETUP” to “ON” and then set “MPEG” to “MPEG” in the setup display (page 51).

Notes

•Refer to the instructions supplied with the component to be connected.

•When you do not connect an audio component with a built-in DTS decoder, do not set “DTS” to “ON.”

•When you do not connect an audio component with a built-in DOLBY DIGIT AL decoder, do not set “DOLBY DIGIT AL” to “DOLBY DIGIT AL.”

•When you do not connect an audio component with a built-in MPEG decoder, do not set “MPEG” to “MPEG.”

Started Getting

Notes

•Do not connect the power cord to an AC outlet or press the POWER switch before completing all connections.

•Refer to the instructions supplied with the component to be connected.

•The cord connectors should be fully inserted into the jacks. Loose connection may cause hum and noise.

•Jacks and plugs of the connecting cords are color-coded as follows:

Red jacks and plugs: Right audio channel

White jacks and plugs: Left audio channel

* Manufactured under license from Dolby Laboratories. “Dolby,” “AC-3,” “Pro Logic” and the double-D symbol aare trademarks of Dolby Laboratories.

Confidential Unpublished Works. ©1992-1997 Dolby Laboratories, Inc. All rights reserved.

15