zYou can turn on the player using the remote

Press 1/u(POWER) when the indicator above the 1/u(POWER) button on the front panel is lit in red.

Notes

•If you leave the player or the remote in pause or stop mode for 15 minutes, the screen saver image appears automatically. To make the screen saver image go away, press ·. (If you want to set the screen saver function to off, see page 46.)

•The indicator above the 1/u(POWER) button lights up in red when the power is turned off.

•If you don‘t operate the player or the remote for more than 30 minutes when a disc is not being played, the power is automatically turned off. (Auto Power Off function)

•When you insert an 8-cm disc, insert the disc slowly at the center of the disc slot. If you cannot eject the disc, consult your nearest Sony dealer.

•With some new discs, glue from the manufacturing process may be present on the outer edge. Forcing such discs into the player may cause the disc to get stuck. Wipe the edge of the disc with the side of a pen or pencil so that the glue is spread evenly along the edge and does not ball up. Be sure not to touch the playback side of the disc when wiping the edge. Then insert the disc into the player.

•With some new discs, burrs from manufacturing may remain on the outer edge or inside the center hole. If such burrs are present, be sure to remove them by rubbing with the side of a pen or pencil. If burrs are not removed, discs may not load properly into the player, or fragments of plastic adhering to the playback side of the disc may cause skipping in the sound.

•No adapter is required in order to play 8-cm CDs on this player. If a single adapter is used, damage to the unit may result; therefore, never use an adapter when playing 8-cm CDs.

1/u (POWER)

§

 

 

 

· P p

6

1/u (POWER)

1 2 3

4 5 6

78 9 0

=/+

3/#

·

p

 

P

To

Operation

Stop

Press p.

 

 

Pause

Press P.

 

 

Resume play after pause

Press Por ·.

 

 

Go to the next chapter,

Press +on the remote.

track or scene in

 

continuous play mode

 

 

 

Go back to the preceding

Press =on the remote

chapter, track or scene in

 

continuous play mode

 

 

 

Locate a point while

Press 3or #on the remote. When

monitoring the picture

you find the point you want, press

(Scan)

·to return to the normal speed.

 

 

Stop play and remove the

Press 6.

disc

 

 

 

You can play discs in various modes such as Program Play using the on-screen menu (Control Menu). For operations of Control Menu, see page 26.

Discs Playing

19