Sony DVP-F11 Speaker Set Up

Speaker Set Up

Select “SPEAKER SETUP” after pressing SET UP.

When you have connected a subwoofer, specify the size of the front speakers you have connected to change the frequency range output from the subwoofer so that you can obtain the best possible surround sound.

Even if you change the setting of “SUBWOOFER” or “FRONT SPEAKER SIZE,” the sound output from the front speakers do not change.

For the speaker hookups, see pages 12 and 14.

SPEAKER SETUP

SUBWOOFER:	YES
FRONT SPEAKER SIZE:	TV

To set, press , then ENTER .

To quit, press SETUP .

pSUBWOOFER

Selects whether a subwoofer is connected to the player or not.

•NONE: When a subwoofer is not connected to the player.

•YES: When a subwoofer is connected to the player, you can select the output level from the subwoofer in “FRONT SPEAKER SIZE” according to the front speakers you are using.

pFRONT SPEAKER SIZE

Selects the size of the connected front speakers. The frequency range output from the subwoofer varies according to the size of the front speakers.

You cannot select this item when you set “SUBWOOFER” to “NONE.”

•LARGE: If you connect large speakers that will effectively reproduce bass frequencies, and play a DVD recorded in 5.1 channel including LFE signal, select this. If you feel a lack of bass frequencies from the front speakers when you select this, select “MIDDLE.”

Note

If LFE signal is not recorded in the disc, no sound will be output from the subwoofer even if you select “LARGE.”

•MIDDLE: If you connect large speakers that will effectively reproduce bass frequencies and play a source on which LFE signal is not recorded, select this to output the bass frequencies in the front channel also from the subwoofer.

If you feel a lack of bass frequencies from the front speakers when you select this, select “SMALL.”

•SMALL: If the sound is distorted, or you feel a lack of surround effects, select this to output the bass frequencies, which the front speakers cannot output, from the subwoofer.

If you feel a lack of bass frequencies from the front speakers when you select this, select “TV.”

•TV: If you do not connect front speakers, select this to output the bass frequencies from the subwoofer.

If you connect small speakers, select this.

zThe subwoofer outputs LFE signal and the frequency range shown below depending on the FRONT SPEAKER SIZE setting.

The LFE signal is output only when the disc contains the LFE signal.

			200 Hz*
		150 Hz*
			+
	100 Hz*	+
	+
LFE	LFE	LFE	LFE
LARGE	MIDDLE	SMALL	TV

* Audio signal besides LFE

Adjustments and Settings

53