CConnecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and 3 to 6 speakers

This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic) decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a Dolby Digital or DTS decoder, refer to page 28.

You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multichannel audio (Dolby Digital) discs.

Pro Logic uses a minimum of 3 speakers (front L and R, and rear (monaural)). The surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer) are used. If your amplifier (receiver) has R and L audio input jacks only, use C-1 . If your amplifier (receiver) has a digital input jack, use C-2 .

xRecommended surround sound effects using this connection with your amplifier (receiver).

• Dolby Surround (Pro Logic) (page 72)

zFor correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).

26