TVS NIGHT
The large sounds, such as explosions, are suppressed, but the quieter sounds are unaffected. This feature is useful when you don’t want to disturb other people but still
want to hear the dialog and enjoy the surround sound effects of “TVS WIDE.”
TVS STANDARD
•“TVS NIGHT” only works with Dolby Digital discs. However, not all discs will respond to the “TVS NIGHT” function in the same way.
•If you use the DIGITAL OUT (OPTICAL) jack, sound will come from your speakers but it will not have the TVS effect.
Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. Use this setting when you want to use TVS with 2 separate speakers and retain the sound quality.
LR
L:Left front speaker
R:Right front speaker 
: Virtual speakers
zIf you select any“OFF,” TVS setting other than the SURROUND indicator on the player lights up.
Notes
•When you select an effect, the sound cuts off for a moment.
•When the playing signal does not contain a signal for the rear speakers (page 52), the surround effects may be difficult to hear.
•When you select one of the TVS modes, turn off the surround setting of the connected TV or amplifier (receiver).
•Make sure that your listening position is between and at an equal distance from your speakers, and that the speakers are located in similar surroundings. Otherwise, the TVS effect may be hard to discern.
54