TV Virtual Surround Sound Settings (TVS) 
When you connect a stereo TV or 2 front speakers, TV Virtual Surround lets you enjoy surround sound effects by using sound imaging to create virtual rear speakers from the sound of the front speakers (L: left, R: right) without using actual rear speakers. This function is designed to work with the AUDIO OUT L/R jacks. Note that if you select one of the TVS settings while playing a DVD, the player does not output the Dolby Digital signals from the DIGITAL OUT (OPTICAL) jack (when you set “DOLBY
DIGITAL” in “AUDIO SETUP” to “D- PCM”) (page 68).
SURROUND 
1 Press SURROUND during playback.
The Control Bar is displayed.
TVS DYNAMIC
2 Press SURROUND repeatedly to select one of the TVS (TV Virtual Surround) sounds.
Refer to the explanations given for each item.
•TVS DYNAMIC
•TVS WIDE
•TVS NIGHT
•TVS STANDARD
To reset the TVS setting
In Step 2, select“OFF.”
TVS DYNAMIC
Uses sound imaging to create virtual rear speakers from the sound of the front speakers (L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. The sound imaging effect is distinct and clearly reproduces each aural element of the audio track.
This mode is effective when the distance between the front L and R speakers is short, such as with
TV
Uses sound imaging to create virtual rearSoundAdjustments speakers from the sound of the front speakers
(L, R) without using actual rear speakers. The virtual speakers are reproduced as shown in the illustration below. This gives the sound an expanded effect that fills the area surrounding the listener.
This mode is effective when the distance between the front L and R speakers is short, such as with
TV
continued
53