Playing Discs

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted.

Refer to the operating instructions supplied with your disc.

?/1button/indicator

 

 

 

x N

A

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

?/1

AUDIO

H x

1 Turn on your TV.

2 Switch the input selector on the TV to the player.

When using an amplifier (receiver)

Turn on the amplifier (receiver) and select the appropriate channel.

3 Press ?/1.

The ?/1indicator (red) changes to green and the front panel display lights up.

4 Insert a disc in the player.

With the playback side facing down

5 Press Non the player or Hon the remote.

The player starts playback (continuous play). Adjust the volume on the TV or the amplifier (receiver).

After following Step 5

Depending on the disc, a menu may appear on the TV screen. You can play the disc interactively by following the instructions on the menu. DVD (page 39), VIDEO CD (page 40).

To turn off the player

Press ?/1. The player enters standby mode and the ?/1indicator lights up in red. To turn off the player completely, disconnect the AC power cord. While playing a disc, do not disconnect the AC power cord. Doing so may cancel the menu settings. When you turn off the player, first press xto stop playback and then press ?/1.

Notes on playing DTS sound tracks on

a CD

•When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo jacks of the player are connected to an amplification system. To

36