Additional Information

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest Sony dealer.

Power

The power is not turned on.

,Check that the AC power cord is connected securely.

,The amplifier (receiver) input is not correctly set.

,The player is in pause mode or in Slow- motion Play mode.

,The player is in fast forward or fast reverse mode.

,If the audio signal does not come through the DIGITAL OUT (OPTICAL) jack, check the audio settings (page 63).

Sound is noisy.

,When playing a CD with DTS sound tracks, noise will come from the AUDIO OUT L/R jacks or DIGITAL OUT (OPTICAL) jack (page 28).

Sound distortion occurs.

,Set “AUDIO ATT” in “AUDIO SETUP” to “ON” (page 62).

Picture

There is no picture/picture noise appears.

,Re-connect the connecting cord securely.

,The connecting cord is damaged.

,Check the connection to your TV (page 16) and switch the input selector on your TV so that the signal from the player appears on the TV screen.

,The disc is dirty or flawed.

,If the picture output from your player goes through your VCR to get to your TV or if your player is connected to a combination TV/VIDEO player, the copy-protection signal applied to some DVD programs could affect picture quality. If you still experience problems even when you connect your player directly to your TV, please try connecting your player to your TV’s S VIDEO input (page 16).

The sound volume is low.

,The sound volume is low on some DVDs. The sound volume may improve if you set “AUDIO DRC” to “TV MODE” (page 62).

,Set “AUDIO ATT” in “AUDIO SETUP” to “OFF” (page 62).

Operation

The remote does not function.

,There are obstacles between the remote and the player.

,The distance between the remote and the player is too far.

,The remote is not pointed at the remote sensor on the player.

,The remote sensor of the player is exposed to strong light.

,The batteries in the remote are weak.

Even though you set the aspect ratio in “TV TYPE” of “SCREEN SETUP,” the picture does not fill the screen.

,The aspect ratio of the disc is fixed on your DVD.

Sound

There is no sound.

,Re-connect the connecting cord securely.

,The connecting cord is damaged.

,The player is connected to the wrong input jack on the amplifier (receiver) (page 20, 21, 22).

The disc does not play.

,There is no disc inside.

,The disc is turned over.

Insert the disc with the labeled (or non- playback) side facing the disc window.

,The player cannot play certain discs (page 6).

,The region code on the DVD does not match the player.

,Moisture has condensed inside the player (page 3).

,The player cannot play CD-Rs, CD-RWs, DVD-Rs, or DVD-RWs (video mode) that are not finalized (page 6).

64