Sharp AR-162S User Programs, Setting the user programs, seconds until all the alarm indicators

USER PROGRAMS

Setting the user programs

Press and hold the light () key for more than 5

1 seconds until all the alarm indicators ( , , , ,

and ) blink and “– –” appears in the copy quantity display.

GENERAL INFORMATION

2

For operation of these programs after step 3, see page 38.

Enter a program number using the numeric keys.

●The selected program number will blink in the copy quantity display.

●If a mistake is made in steps 2 to 4, press the CLEAR () key. The copier will return to step 2.

●The program numbers are shown in the table below.

For example, to change the setting of the auto power shut-off timer, press key 3.

Program name	Program No.
Auto clear time	1
Preheat mode	2
Auto power shut-off timer	3
Stream feeding mode	4
Auto power shut-off setting	5
Auditing mode	10
Account number entry	11
Account number change	12
Account number deletion	13
Number of copies per account	14
Resetting account	15

User programs

Press the START key.

3 ● For programs 1 to 5, the entered program number will be steadily lit on the left side of the copy quantity display and the currently selected parameter number for the program will blink on the right side.

●For programs 10 to 15 (programs for auditing accounts), the display varies with the program number. See page 38 for setting programs 10 to 15.

36