Sharp AR-162S Interrupting A Copy Run, Press the INTERRUPT key, START key to resume copying

INTERRUPTING A COPY RUN

INTERRUPT is used to interrupt a long copy run so that another job can be done.

Press the INTERRUPT key.

1 ● The copier will return to the initial settings.

● If this copier has been programmed in the auditing mode using user program No. 10, “–––” will appear in the copy quantity display. Enter your account number using the numeric keys. The number of copies of the interrupt copying will be accumulated against this account number. See page 13.

● When an optional SPF is being used, the copier will stop after completing the copying of the original which has been fed into the SPF.

When the copier stops, remove the original(s) and set

2 the original(s) for interrupt copying.

3 Select the desired available copier functions.

4 Set the number of copies.

5 Press the START key.

When all INTERRUPT copies are finished, press the

6 INTERRUPT key again to cancel the INTERRUPT mode, and remove the original used for interrupt copying.

●The previous copy quantity, copy ratio, copy density, and paper size

will be automatically restored.

Replace the original for the interrupted job and press the

7 START key to resume copying.

MAKING COPIES

Interrupting a copy run

25