REDUCTION/ENLARGEMENT/ZOOM
Manual
Place the original on the original table and close the
1 platen cover.
Use the PRESET RATIO selector (
, 
) keys and the
2 zoom (
, 
) keys to select the desired copy ratio.
● To select a preset reduction or enlargement copy ratio, press the 
or 
key repeatedly until the indicator for the desired copy ratio is lit.
A. Preset reduction ratios are: 95%, 77%, 64%, and 50% .
B. Preset enlargement ratios are: 121%, 129%, 141%, and 200%.
C. Zoom ratios: Any ratio from 50% to 200% can be set, in 1%
increments. Press the | or | key to set the approximate |
ratio, then press the | key to decrease the ratio or the key | |
to increase the ratio. |
|
|
● When a zoom (
, 
) key is pressed, the ZOOM indicator will light up and the zoom ratio will be displayed in the copy quantity display for at least two seconds.
● To verify a zoom setting without changing the zoom ratio, press and hold down the copy ratio display (
) key. When the key is released, the display will return to the copy quantity display.
● To decrease or increase the zoom ratio rapidly, press and hold down the 
or 
key. However the value will stop at the preset reduction or enlargement ratios. To move beyond these ratios, release the key and then press and hold it down again.
D. 
or 
key repeatedly until the copy ratio returns to 100%.
Ensure that copy paper of the desired size is installed in
3 the paper tray.
●If desired, the bypass tray can be selected by pressing the TRAY SELECT key.
MAKING COPIES
Reduction/enlargement/zoom
4 Set the number of copies and press the START key.
17
