Care and cleaning of the range. | GEAppliances.com |
Be sure electrical power is off and all surfaces are cool before cleaning any part of the range.
WARNING:If your range is removed for cleaning, servicing or any reason, be sure the
Safety Instructions
Front right burner
Burner cap
Burnerhead
Electrode
Burnerbase
Make sure the hole in the burnerhead is positionedover the electrodeand that the burnerhead is fully insertedinside the burnerbase. A small gap between the base and head is normal.
Front left burner,back right burner
and back left burner
Burnercap
Burnerhead
Stability | Use a sewing |
chamber | needle or twist- |
| tie to unclog the |
| small hole in the |
| burner head. |
Burnerbase Electrode
Make sure the slot in the burnerhead is positionedover the electrode.
Sealed Burner Assemblies
Turn all controls OFF before removing the burner parts.
The round side burner caps and burner heads can be lifted off, makingthem easy to clean. The electrodes are not removable.
The oval center burner head and cap assembly can be lifted off, making it easy to clean. The burner electrode is not removable.
Center griddle
Burner head
and cap
assembly
Electrode
CAUTION: Do not operate the cooktop without all burner parts and grates in place.
ElectrodeBurnerhead
| Electrode |
Front left, back right | Burnerbase |
| |
and back left burner |
|
Front right burner
The electrode of the spark igniter is exposed when the burner head is removed. When one burner is turned to LITE, all the burners spark. Do not attempt to disassemble or clean around any burner while another burner is on. An electric shock may result, which could cause you to knock over hot cookware.
Operating Instructions
Instructions | Installation |
Troubleshooting Tips Consumer Support
31
